Feature
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
1. Core Material. all fresh selected premium eucalyptus strip, finger joint connection.
2. Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
3. Precision Kiln-Drying: Our timber undergoes controlled kiln-drying before production to ensure consistent moisture content, dimensional stability and reliable panel performance
4. High-Temperature, High-Pressure Hot Pressing. all blockboard panels are manufactured through a hot-pressing process at 130°C using a 600-ton press.
5. Options for surface treatment.
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET; Option 5: HPL
6.Full range thickness: 16mm, 18mm, 20mm, 25mm, 35mm, 38mm, 40mm, 45mm, 50mm
7. Big size:1220*2440mm, 1220*2745mm, 1220*3050mm
8. Full range application. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
9. High Water Resistant Performance. Moisture Resistant (MR)
9. Ultra Low Formaldehyde Emission
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
10. Swelling-Resistant
Exhibits excellent dimensional stability, with no visible swelling observed
under standard moisture and water exposure test conditions.
11. Crack-Resistant
Maintains surface integrity without visible cracking during normal indoor use
and under typical moisture exposure conditions.
12. Warp-Resistant
Demonstrates stable dimensional performance and resistance to warping or deformation
under normal indoor temperature and humidity variations.
13. Water-Resistant Surface Performance
The surface finish provides resistance to incidental water contact and staining,
supporting use in controlled interior environments.
Not represented as waterproof or exterior-grade.
14. Termite-Resistant (Engineered Performance)
Engineered to provide resistance to termite attack under standard laboratory test conditions.
This characteristic reflects material design and processing, not a lifetime guarantee.
15. Broad Indoor Service Temperature Tolerance
Recommended for use within typical indoor ambient temperature ranges
(approximately −25°C to 65°C) under controlled interior conditions.
16. Long-Term Interior Durability
Designed for durable, long-term service in interior, non-structural applications
when properly fabricated, installed, and maintained. Longevity over 50 years.
17. Unique patented technology
Dual-T Anti-Warp & Crack Control Technology
It supports the fabrication of full-height wardrobe doors up to 2,800 mm, maintaining dimensional stability during long-term indoor use.Under normal interior conditions, the panel demonstrates effective resistance to deformation, warping, and surface cracking, without reliance on additional mechanical straightening devices.
18. Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
19. OEM/ODM service
✓ Verified Elite Supplier